Yamaha MU100 Owner's Manual page 121

Performance Edit Mode
Performance Name
Performance Name (Perform Name)
This allows you to give a name to your
edited Performance.
Operation
1 From the Performance Name dis-
play, press the ENTER button.
Performance name
2 Use the SELECT </> buttons to
select the character position
(flashing character) in the name
and use the VALUE -/+ buttons
or data dial to change the charac-
ter at that position.
Use these to move among character positions.
Flashes to indicate character position.
Use these to change character at selected position.
Up to 12 characters can be used
for the Performance name. Avail-
able characters include all letters
of the alphabet, in both upper and
lower case, numbers from 0 to 9,
and a variety of miscellaneous
characters.
124
3 Press the EXIT button to return to
the previous display (or press the
PLAY button to return to the Play
display).
After creating and naming a Per-
formance, you'll probably want to
save that Performance for future
recall. For instructions on saving a
Performance, refer to the Store
operation on page 130.
Portamento Parameters
Portamento Switch (PortamnSw)
Same as the corresponding parameter in
the Multi Edit mode. (See page 109.)
Portamento Time (PortamnTm)
Same as the corresponding parameter in
the Multi Edit mode. (See page 109.)
Modulation Wheel Parameters
Modulation Wheel — LFO Pitch
Modulation Depth (MW LFOPMod)
Same as the corresponding parameter in
the Multi Edit mode. (See page 112.)
Performance Mode