Mitsubishi Electric e Series Service Handbook page 44

[ II Restrictions ]
(C) System leader unit and group leader unit (3 groups, 1 unit in each group)
(1) Setting address 1
) 1 Turn off the power.
2) System leader unit (Address 1 SW5-2, 5-3: ON)
3) Turn the power back on.
Address 1
Address 51
4) Setting the number of units for each group
*The default setting for the number of units in a group is 1.
5) Setting the number of groups
SW7: 1 ON
Press ENTER once.
SW4: 5, 8, 10 ON
↓
Address 1
↓
Press UP twice.
↓
Address 1
↓
P e r s s E N T E
SW4 OFF
*The default setting for the number of units in a group is 1.
The maximum number of groups is 24.
HWE20010
A
A
A
→ LED display [EEEE]
→ LED display [9999]
→ LED display [1]
→ LED display [3]
R o n c . e
Address [1/51]
System leader unit
B RA RB
Remote controller
Address [2/52]
Group leader unit
B
Address [3/53]
Group leader unit
B
(2) Setting address 2
6) Turn off the power.
7) Group leader unit (SW5-2: ON)
8) Turn the power back on.
Address 2
Address 52
9) Setting the number of units for each group
*The default setting for the number of units in a group is
1.
10) SW7: 1, 2, 3, 4 ON and ENTER for 5 seconds.
(Initializes the system)
Address 2
Address 52
Start-up process complete
Address 2
Address 52
*Address 3 (Group leader unit) is set in the same way as
above.)
(3) Setting address 1 (second time)
11) SW7: 1, 2, 3, 4 ON and ENTER for 5 seconds.
(Initializes the system. System leader unit initialized last)
Address 1
Address 51
Start-up process complete
Address 1
Address 51
12) SW7 OFF
- 35 -
M 1 M 2
M 1 M 2
M 1 M 2
→ LED display [EEEE]
→ LED display [9999]
→ LED display [9999]
→ LED display [9999]
→ LED display [9999]
→ LED display [____||_|]
→ LED display [9999]
→ LED display [9999]
→ LED display [____||_|]
→ LED display [____||_|]
GB