Mitsubishi Electric e Series Service Handbook page 147

[ IX Troubleshooting ]
Compressor Replacement Instructions
Required tools
▪ Screwdriver (for M4 and M5 screws)
▪ Nippers (for cutting the tie band)
▪ Small ratchet (for M6 nuts)
▪ Metal saw
▪ Welding tool set
* Notes on tie band (cable tie with a locking device)
If you accidentally cut the cable tie on tie band during replace-
ment, cut off the tie all the way to the locking device, and
insert a regular cable tie (5 mm max.) through the locking
device.
Location of the nut that requires a small ratchet
Compressor arrangement
< Compressor weight > 45 kg
< Opposite side of the
service side >
HWE20010
Cut here.
< Left side >
Compressor 2B
Compressor 2A
Compressor 1B
Compressor mounting nut (M6)
Compressor 1A
- 138 -
< Service side >
GB