Please Read This First - Yaesu FT-2000 Operating Manual

P R
LEASE EAD
6. C D
Use the [ F1 ( )] and [ F2 (
"DATA," then press the the [ F7 ( SELECT )] key.
Use the [ F3 ( )] and [ F4 ( )] keys to navigate to each
column of the date, then use the [ F1 ( )] and [ F2 ( )]
keys to select the desired numbers in each column.
Repeat for each column, to complete the date.
When entry is complete, press the [ F7 ( SELECT )] key.
7. T S
Press the [ F1 ( )] and [ F2 (
"TIME," then press the [ F7 ( SELECT )] key to enter
the time entry mode.
Use the [ F3 ( )] and [ F4 ( )] keys to navigate to the
desired column in the date, then use the [ F1 ( )] and
[ F2 ( )] keys to select the desired number in each
column. Time is entered in 24-hour format.
When entry is complete, press the [ F7 ( SELECT )] key.
Page 6
T F
HIS IRST
)] keys to highlight
)] keys to highlight
8. S D
Once you have selected the city to be utilized, use the
[ F1 ( )] and [ F2 ( )] keys to highlight "DST" (D -
S T ).
Use the [ F3 ( )] and [ F4 ( )] keys to choose "ON"
or "OFF."
9. S C
When you have completed all the above entries to your
satisfaction, press and hold in the [ F7 ( SELECT )] key
for two seconds to save all the new settings. The cho-
sen city and time zone will appear on the World Map
page.
Note: The [ F1 ( SET )] key is only used when setting the
city name and local time. If you make a mistake, press
the [ F7 ( SELECT )] key for 2 seconds. Pressing the
[ F7 ( SELECT )] key for two seconds will return you to
the World Map screen.
DMU-2000 D
S T
M U