Off Timer And Alarm Setup - Yaesu FT-2000 Operating Manual

H U
OW TO
It is easy to set the OFF Timer and Alarm times.
As to the OFF TIMER, countdown intervals of 120/90/60/30/15 minutes, and OFF, can be selected.
For the alarm setting, it is possible to choose either LOCAL-TIME1 or LOCAL-TIME2, set the alarm time, set the Alarm
ON or OFF, and/or sound the alarm one time only or every day.
1. On the World Map screen, press the [ F5 ( TIMER )] key
to move to the OFF TIMER and ALARM setup screen.
2. Press the [ F1 ( )] , [ F2 ( )] , [ F3 ( )] , [ F4 ( )] key
to move the cursor to the desired setup item; the se-
lected item will be highlighted.
OFF TIMER setup:
120/90/60/30/15 minutes, and OFF
ALARM setup:
(When setting up the Alarm, be sure to set the OFF
TIMER setting to OFF!)
TIME ZONE (LOCAL TIME-1/LOCAL TIME-2)
ALARM TIME
ALARM ON/OFF
CYCLE (ONCE/DAILY)
3. Press and hold in [ F7 ( SELECT )] for 2 seconds to
close and exit.
Advice: When the OFF timer is engaged (power is shut
off), the condition of the radio is the same as if the power
switch on the front panel has been turned off. The Main
power (circuit breaker) is not turned off.
The Alarm will ring for around 60 seconds. If you want to
stop the alarm, press any of the keys located on the front
panel.
Page 18
W
SE THE ORLD
OFF T
IMER AND
C
LOCK
A S
LARM ETUP
"O T A S " S
DMU-2000 D
[ F5 ( TIMER )] Key
M U