Yaesu FT-2000 Operating Manual page 52

U
SING THE
The FT-2000's Menu mode includes 147 different settings, used for configuration of various transceiver features and
functions that generally are set once, and then seldom changed. Press the [ MENU ] button momentarily to bring up the
Menu Mode Screen.
Advice: The 147 items in the menu are grouped into 18 categories, and the groups are displayed at the left top of the
menu list screen. It will be most convenient for you if you initially select the group, by rotating the Main Dial, and then
select the individual menu item you want to work on.
G N M
AGC
This group is used for the setting up the AGC timing
parameters. The AGC characteristics can significantly
affect the performance of the receiver, and we rec-
ommend that you not change the settings in normal
use. If the setting gets changed by accident, please
do the menu mode reset described on page 11.
DISPLAY
This is the display-related group, related to the Dim-
mer, Display color, clarifier display, etc.
DVS
This is the group relating to the setting of the input/
output level of the voice memory.
KEYER
Setup of the configurations of the internal electronic
keyer.
GENERAL
This group covers miscellaneous items which are not
included in other groups.
S IF SHIFT
Setup of the center frequency of the Sub band (VFO-
B) receiver's IF filter.
Page 50
M M
ENU ODE
A
BOUT THE
MENU M
ODE
MODE AM, MODE CW, MODE DATA,
MODE FM, MODE RTY, MODE SSB
These are the groups related to items associated with
different operating modes, and which may be config-
ured separately.
RX AUDIO
This is the group related to the setting of the head-
phones and internal speakers.
RX DSP
This group pertains to the settings for the RX filter
bandwidth, as well as other receiver filter configura-
tions.
SCOPE
This group is used to set the starting frequency for
the Spectrum scope on the FIX mode (band by band).
TUNING
This is the Dial step configuration group.
TX AUDIO
This group is used for setup of the parametric equal-
izer.
TX GNRL
This group is used for setting the TX RF output, con-
figuration of linear amplifier switching, etc.
DMU-2000 D M U