Yaesu FT-2000 Operating Manual page 45

G C
REAT IRCLE
E
XPLANATION OF THE
F4 MODE Key
By pressing this key, the rotation control mode can
be selected. With every momentary press, the mode
changes as shown below. The mode is indicated in the
middle of the Display.
MANUAL PRESET MEMORY MANUAL ......
MANUAL: CW/CCW control is performed
manually.
Rotation to the "PRESET" direction
PRESET:
is selected.
MEMORY: Rotation to one of the stored rotation
memories is selected.
MODE Indicator
F5 SLOW Key
When you want to slow down the speed of the rota-
tion, this key is used. Normally, you will use the "100
%" value; once 100 % is selected, you typically will
not need to use this key.
DMU-2000 D M
M / R
AP
F K
UNCTION EYS ON THE
G
U
C
OTATOR ONTROL FUNCTION
G C M
REAT IRCLE AP
F6 FAST Key
When you want to increase the speed of the rotation,
this key is used. Normally, you will use the "100 %"
value; once 100 % is selected, you typically will not
need to use this key.
F7 MAP Key
This key switches the Display between the Great
Circle Map and the regular Rotator Control compass
display.
Advice: If the Great Circle display is utilized, you
probably already know the approximate location of
the other station on the map; so even if the country
name and the city name are not entered into the radio,
the Great Circle Map provides a convenient tool for
rotating the antenna to the optimum heading.
If your own location is not indicated at the center of
the Great Circle Map, please set the local time (which
registers the location where the radio is operated). If
this is not done, the various functions of the World
clock and Great Circle Map will not function cor-
rectly. Regarding the setting of the Local time, please
see the "PLEASE READ THIS FIRST" section.
DISPLAY Key
Press this key momentarily to switch the Function
key's function between the "Page Select Key" and the
"Function Key."
Press and hold in this key to disable the Function keys
(except this key).
C M D
/R C S
OTATOR ONTROL
Page 43
CREEN