Set (Local-Time1) Setup - Yaesu FT-2000 Operating Manual

Please see the "PLEASE READ THIS FIRST" information (Page 4).
This procedure lets you choose between 12-hour and 24-hour time display format.
1. While the World Map is displayed, press the
[ F2 ( FORMAT )] key to select the "TIME FORMAT"
screen.
2. Press the [ F1 ( )] , [ F2 ( )] , [ F3 ( )] , [ F4 ( )] keys,
and select 12-hour or 24-hour display for "LOCAL-
TIME1," "LOCAL-TIME2," and the "WORLD CITY
LIST."
When "SEC" is set to "ON", the "seconds" digits will
be shown at the top right corner of the after-market
monitor, in the Local Time indication area.
Advice: If you press the [ F6 ( SECADJ )] key, the "sec-
onds" indication will reset to "00." Use this to sunc
your clock to a time standard such as WWV.
3. When all settings are complete, press and hold in the
[ F7 ( SELECT )] key for 2 seconds to exit.
DMU-2000 D M
H U
OW TO
SET LOCAL-TIME1 S
FORMAT TIME FORMAT S
U
W
SE THE ORLD
ETUP
ETUP
[ F2 ( FORMAT )] Key
"SELECT" Keys
C
LOCK
[ F6 ( SECADJ )] Key
Set to "00" Second
Page 15