About Menu Mode Operation - Yaesu FT-2000 Operating Manual

B U
EFORE
The Menu mode's various selections and parameters can be displayed on the external monitor. For details on menu
operation, please see the discussion below.
E M M
1. If you press and hold in the [ DISPLAY ] key for more
than two seconds, white letters will appear at the bot-
tom of the screen to indicate various functions, and
the [ F1 ( CH-1 )] ~ [ F7 ( P.BACK )] and [ DISPLAY ] keys
will act as "Function" keys.
If you once more press and hold in the [ DISPLAY ]
key for at least two seconds, the white-lettered tabs
will disappear, and control of the various functions
will be cut off; the [ F1 ( CH-1 )] ~ [ F7 ( P.BACK )] and
[ DISPLAY ] keys will no longer act as "Function" keys.
2. Press the [ MENU ] button momentarily. The Menu list
will appear on the after-market monitor, and you will
see the Menu Number, Menu Groups, Menu Items,
and the current settings for each item display on the
monitor.
3. Rotate the Main Tuning Dial knob (or press the
[ F6 ( )] and [ F7 ( )] keys) to select the Menu item
you wish to work on.
4. Rotate the [ SUB VFO-B ] knob (or press the [ F4 ( )]
and [ F5 ( )] keys) to change the current setting of
the selected Menu item.
5. When you have completed the changes to the Menu
item(s), press and hold in the [ MENU ] button for 2
seconds; the setting(s) will now be saved.
If you do not want to save the new setting, press the
[ MENU ] button momentarily; the radio will revert to
its previous condition.
Page 10
E
SING AN
A M
BOUT ENU
M
XTERNAL
M O
ODE PERATION
[ DISPLAY ] Key
Function Keys
DMU-2000 D
ONITOR
[ MENU ] Button
Main Tuning Dial Knob [ SUB VFO-B ] Knob
Function Tabs
M U