Yaesu FT-2000 Operating Manual page 18

Data management unit
Hide thumbs Also See for FT-2000:
Table of Contents

Advertisement

H
U
OW TO
It is possible to select any city name which is displayed on the World Clock screen.
Advice: The order of the display of the cities can be changed later; for now, please just select one of the supplied city
names.
There may only be one city shown in some countries; however, it is possible to add cities, if desired.
If you wish to add a city to the City List that was programmed at the factory, you will need to supply your own USB or PS/
2 Keyboard. If you utilize one of the pre-loaded cities, a keyboard is not necessary.
1. Press the [ F3 ( CITY )] key while the World Map is dis-
played, and the Display will show the "Area Selec-
tion" screen.
2. Press the [ F1 ( )] , [ F2 ( )] , [ F3 ( )] , [ F4 ( )] keys
to select the continent in which the desired city is
located.
3. Confirm that the desired area is highlighted, and press
the [ F7 ( SELECT )] key momentarily. Now the coun-
try list for the selected continent will be displayed.
4. Use the [ F1 ( )] , [ F2 ( )] , [ F3 ( )] , [ F4 ( )] keys to
select the desired country in this area.
5. Now press the [ F7 ( SELECT )] key momentarily, and
you will see the list of the city names in the country
selected.
6. Press the [ F1 ( )] , [ F2 ( )] , [ F3 ( )] , [ F4 ( )] key
to select the desired city. Even if the city displayed
is the only one in the country, select it anyway.
7. Once you have pressed the [ F7 ( SELECT )] key mo-
mentarily, the selected country name and the city name
will be indicated, thanks to the procedure mentioned
above. If you want to input a city name which is not in
the list, press the [ F7 ( SELECT )] key after confirm-
ing that the city name is highlighted. Then, enter the
city name you want.
8. Press the [ F1 ( )] , [ F2 ( )] , [ F3 ( )] , [ F4 ( )] key
to set "DAYLIGHT SAVING TIME (Summer Time),"
"DISPLAY MAP" (display or not display city names
on the World Clock screen), or "HIGHLIGHT" (se-
lect highlighted indication (yellow) or normal (white)
indication).
9. When finished, press and hold in the [ F7 ( SELECT )]
key for 2 seconds to exit.
Page 16
W
SE THE
ORLD
CITY S
C
LOCK
ELECTION
"A
S
" S
"C
S
" S
"C
S
" S
DMU-2000 D
[ F7 ( SELECT )] Key
[ F7 ( SELECT )] Key
[ F7 ( SELECT )] Key
M
U

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dmu-2000

Table of Contents