Weber SmokeFire SEAR+ ELX4 Owner's Manual page 38

TROUBLESHOOTING
Replacing the Internal Grill Light
If the internal grill light is out, it might be time to change the light bulb.
1. Make sure that your grill is shut down, powered off, and unplugged
from the power source.
2. Using the included grill scraper, carefully pry the outside lens from
the grill light housing (A) (B).
CAUTION: DO NOT USE A SCREWDRIVER OR ANY METAL TOOLS TO PRY THE
LENS FROM THE HOUSING. IT COULD CRACK AND BREAK THE LENS.
3. Gently pull the old light bulb from the socket to remove it (C).
4. With the grill light lens removed, gently wipe any dirt or dust from the
inside of the lens and light bulb socket using a lint free, non-abrasive
cloth.
NOTE: Periodically wipe the lens with a damp cloth to keep the interior grill
light illuminating brightly.
5. Replace the light bulb as follows:
120V regions: 40W Halogen G9 120V
230V regions: 40W Halogen G9 230V
CAUTION: USE HALOGEN REPLACEMENT BULBS ONLY. DO NOT USE LED
BULBS AS A REPLACEMENT. IT COULD CAUSE COMPNENT DAMAGE OR
FAILURE.
Using gloves or a lint free, non-abrasive cloth, carefully install the new
light bulb by gently pushing it into the socket (D).
CAUTION: DO NOT USE YOUR BARE HANDS WHEN INSTALLING THE NEW
LIGHT BULB. THIS COULD LEAD TO PREMATURE BURNOUT OF THE LIGHT
BULB.
6. Reinstall the internal grill light lens onto the housing by gently
pressing the lens back onto the front of the housing (E).
A
38
B
C
D
E