Weber SmokeFire SEAR+ ELX4 Owner's Manual page 34

TROUBLESHOOTING
Replacing the Glow Plug
Contact WEBER Customer Service at weber.com for a replacement glow
plug. To replace the glow plug, please follow these steps:
1. Open the grill lid and shutdown the grill by pushing and holding the
dial or using the main menu. Wait until the grill has completed the
shutdown procedure and completely cooled.
CAUTION: Do not unplug the grill or turn it off during the shutdown procedure.
2. Once the grill has completed the shutdown procedure and cooled,
power off the grill (A) and unplug from power source.
3. Open the grill lid and remove the cooking grates, FLAVORIZER bars,
heat diffuser, and heat baffle from the cookbox. (B).
4. From the rear of your SMOKEFIRE grill, remove the rear access panel
by removing four screws (C).
5. Unplug the glow plug shuttle wires from the back of the glow plug
shuttle (D).
6. Remove the screw that holds the glow plug shuttle in place and
carefully slide the shuttle out from the barbecue (E).
7. Remove the glow plug from the glow plug shuttle by pulling it out and
away from the shuttle (F).
A
B
34
C
D
E
F