Weber SmokeFire SEAR+ ELX4 Owner's Manual page 33

Notification
Low Fuel
Cook Complete
Improper Shutdown
Loss of Temperature
Shutdown Started
NOTE: Download the WEBER CONNECT app to get the latest grill software and controller
features.
The controller will display and send notifications to inform you of certain grill operations
and preventative maintenance cautions. Refer to this troubleshooting section and follow
the "Sequence / Actions" column associated with the notification displayed along with the
following instructions.
Sequence / Actions
Refill the hopper with WEBER ALL NATURAL HARDWOOD PELLETS.
Your cook has ended. You now have the option to continue to cook at the same grill
temperature, change the grill temperature, or shutdown the grill.
The grill was improperly shutdown.
1. The grill will automatically run the shutdown procedure if the grill is still hot. Open
the grill lid and wait until the grill has completed the shutdown procedure and
completely cooled.
CAUTION: Do not unplug the grill or power it off during the shutdown procedure.
2. Once the shutdown procedure is complete, power off the grill and unplug from
power source.
3. Remove the cooking grates, FLAVORIZER bars, heat diffuser, and heat baffle from the
cookbox.
4. Clean the cookbox and burn pot of any ash or debris using a grill brush or scraper to
direct it into the ash and grease system.
CAUTION: Allow time for the ash and debris to fully extinguish before cleaning the grill.
5. Remove and clean any ash or grease from inside the ash and grease system. Once
cleaned, reinstall the drawer. Replace disposable drip pans as needed.
6. Reinstall the heat baffle, heat diffuser, FLAVORIZER bars and cooking grates inside
the cookbox.
7. Plug in, power on the grill, and begin a cook to allow the controller to run
diagnostics.
If you receive the Loss of Temperature notification, it is most likely due to lack of fuel.
1. Open the hopper lid to ensure there are enough pellets and visually inspect for pellet
stacking. If pellet stacking occurs, use the included scraper to push the pellets down
toward the auger.
2. Refill the hopper with WEBER ALL NATURAL HARDWOOD PELLETS, and close the
hopper lid.
3. With the grill lid closed, your SMOKEFIRE grill will attempt to recover to the set
temperature.
CAUTION: The grill may produce some excessive smoke while recovering temperature. As the
grill recovers it will subside.
Shutdown sequence:
1. Burning off excess fuel
2. Clearing auger
3. Cleaning burn pot of ash
4. Cooling grill for storage
5. Shutdown Complete
CAUTION: The grill will remain hot during the shutdown sequence. Do not unplug the grill or
power it off during the shutdown procedure.
TROUBLESHOOTING
33
weber.com