Weber SmokeFire SEAR+ ELX4 Owner's Manual page 31

E7 Motor Failure
Checking Motor Electrical Connection
To clear the E7 error code from the controller, please follow these steps:
1. When the grill has completed the shutdown procedure and
completely cooled, power off the grill and unplug from power source
(A).
2. From the rear of your SMOKEFIRE grill, remove the rear access panel
by removing four screws (B).
3. Check the electrical connection on the motor (C). Make sure the
connector is securely joined to the motor.
4. Reinstall the rear access panel (D).
5. Plug in, power on the grill, and begin a cook to allow the controller to
run diagnostics.
6. If the E7 error code still remains on the controller, contact the
Customer Service Representative in your area using the contact
information on our website for motor replacement.
TROUBLESHOOTING
A
B
C
D
31
weber.com