Deleting Text; Clear Data; Cancel Functions; Error Messages - Brady M210 User Manual

Deleting Text

To remove characters, one at a time, from the position of the cursor TO THE LEFT (backwards):
Press Backspace
.
If you want to delete characters in the middle of the line of text, use the navigation keys to position the
cursor to the right of the characters you want to delete, then press [BACKSPACE].

Clear Data

The Clear key is used to clear all data from the screen.
To clear data:
Press CLEAR .
Clear removes all data on the label, but leaves the formatting in place (e.g., font size, label type, etc.)

Cancel Functions

Backspace is also used to cancel functions or a menu. When pressing [BACKSPACE] in
the middle of a function, you are walked out of the function a screen at a time. You may have to press
[BACKSPACE] several times to completely exit the function.

Error Messages

If a function does not operate under current conditions, an error or information message displays
indicating the problem and/or offers situational advice. Read the message carefully and follow the
instructions. (A list of error messages can be found in the Troubleshooting section of this manual,
starting on page 67.)
33
M210/M210-LAB User Manual