Wiremarker Label Type (M210) - Brady M210 User Manual

WireMarker Label Type (M210)

The WireMarker label type is designed to repeat entered data down the length of the label. The data
repeats as many times as possible, considering the font size and the wire size selected.
WireMarker label type - text on screen
All media, except Permasleeve, support WireMarker label types.
To use the WireMarker label type:
1. Press LABEL TYPE.
2. Using navigation keys, choose WireMarker, then press Enter
3. Navigate to the appropriate label size to fit the intended wire, then press Enter.
Note: Size is automatically determined when using pre-sized labels and is displayed in the lower
left corner of the screen (examples: W.75, W1.5, W2.0)
4. Enter the data you want repeated down the length of the label.
Note: The repeated data does not display on the screen, but displays on printout.
5. Press Enter to start a new line of text.
When the label is printed, both lines of text are repeated down the label, depending on the size
of the label and font.
M210/M210-LAB User Manual
WireMarker label type - printed text
.
56