Brady M210 User Manual page 888

Landscape printout - rotation 0
7. When finished, press Enter.
Note: If serialization was turned OFF, proceed to Step 15. If serialization was turned ON, you are
presented with the Serial screen. Continue with the following:
8. With the cursor displayed in the Start: field, enter the start value of the sequence.
9. In the Increment field, enter the increment value.
The default increment is 1. If that is the desired increment, skip this entry field.
10. In the End: field, enter the end value of the sequence.
11. When ready, press Enter.
Note: If serialization was turned ON, the serial start value is displayed on the editing screen.
However, all labels in the serial sequence will print out. Likewise, if you delete the start value
on the editing screen, the entire serialization sequence will be deleted.
To delete the serialization sequence:
12. Press Backspace
A confirmation message displays.
To delete the entire sequence:
13. Press Enter.
M210/M210-LAB User Manual
°
Portrait printout - rotation 90
.
°
59