Loading The Lithium Ion Battery Pack - Brady M210 User Manual

Loading the Lithium Ion Battery Pack

When using an M210-BATTERY Lithium Ion battery pack, please consult the instructions enclosed
with the battery pack for the charging procedure.
On the back of the printer,
squeeze the finger tabs
located on both sides of
the battery compartment
door, then swing the
battery compartment door
up and out. (The door will
come off.)
Finger Tab
M210/M210-LAB User Manual
With the battery label
facing down, insert the
elongated portion of the
battery (just below the
alignment tabs) into the
slot at the bottom of the
battery compartment; then
push the top part of the
battery down until it snaps
into place. (The battery
alignment tabs fit into the
cutout finger tab grooves.)
Alignment Tab
Re-insert the battery door
hinge at the top of the
compartment and push
down on the battery
compartment door,
snapping it into place.
Door Hinge
8