Create A Label; Entering Text; Inserting Text; Font Size - Brady BMP 41 Quick Start Manual

14

Create a Label

Create a Label

Entering Text

The vertical line is the cursor and is the starting point for every label you create using
®
the BMP 51 printer. Begin entering text at the position of the cursor. The cursor moves
across the screen as you enter data. If you want another line of text, press the ENTER
key.

Inserting Text

To insert additional text within a line of text:
1. Using navigation keys, position the cursor at the point where text should be inserted.
2. Enter the text.
Existing data positioned to the right of the cursor moves progressively to the right to
make room for the inserted text.

Font Size

Font size applies to an entire line of data at a time. To change the size of the chosen
font:
1. Press Font
2. Press the Up or Down navigation arrows to choose the font size desired.
3. Press .

Deleting Text

To remove characters, one at a time, from the position of the cursor TO THE LEFT
(backwards):
1. Position the cursor to the right of the characters you want to delete.
2. Press Backspace

Clear Data

To Clear all text on a label:
1. Press Clear
2. Select
®
BMP 41 Quick Start Guide
.
, once for each character to delete .
, then press .
.
English
6/7/13