Deleting Text; Clear Data; Error Messages - Brady BMP 21-PLUS User Manual

36
Getting Started
Editing Text

Deleting Text

To remove characters, one at a time, from the position of the cursor TO THE LEFT
(backwards):
1.
If you want to delete characters in the middle of the line of text, use the navigation keys to
position the cursor to the right of the characters you want to delete, then press [BACKSPACE].

Clear Data

The Clear key is used to clear all data from the screen.
To clear data:
1.
Clear removes all data on the label, but leaves the formatting in place (e.g., font size, label
type, etc.)
Cancel Functions
Backspace
[BACKSPACE] in the middle of a function, you are walked out of the function a screen at
a time. You may have to press [BACKSPACE] several times to completely exit the
function.

Error Messages

If a function does not operate under current conditions, an error or information message
displays indicating the problem and/or offers situational advice. Read the message carefully
and follow the instructions. (A list of error messages can be found in the Troubleshooting
section of this manual, starting on
BMP ® 21-PLUS/BMP ® 21-LAB User's Manual
Press Backspace
Press CLEAR
is also used to cancel functions or a menu. When pressing
.
.
page 70.)