Loading The Bmp Lithium Ion Battery Pack - Brady BMP 51 User Manual

Loading the BMP Lithium Ion Battery Pack

If using a BMP Lithium Ion battery pack, please consult the instructions enclosed with the
battery pack for charging and discharging the BMP-UBP rechargeable battery.
On the backside of the
1.
printer, using your thumb,
pull the door release latch
downward, then swing the
battery compartment door
up and out. (The door will
come off.)
Loading the BMP Lithium Ion Battery Pack
With the battery label
2.
facing outward, insert the
battery pegs into the peg
slots at the top of the
compartment; then tip the
battery downward into
place.
Power Source
Re-insert the battery door
3.
hinges at the base of the
compartment and swing
the battery compartment
door closed, snapping it
into place.
®
BMP 51 User's Manual
9