Table of Contents
Advertisement
Installation
Removing shipping material
1. Raise the document cover, remove the sheet of cardboard from the
document glass and then close the document cover.
2. Raise the scanner module to access the print cartridge carriage area.
3. Remove the tape that blocks the print cartridge carriage in its rest
position, pulling on the red REMOVE BEFORE USE tab.
4. Close the scanner module.
Installing paper trays
1. Install the input tray in lower front of
the WorkCentre so that it slides
completely into the slots on the
underside of the bottom cover.
2. Install the output tray in the lateral
guides in the paper output area, above
the input feed tray.
7
Advertisement
Table of Contents
