Xerox WorkCentre Xi70c User Manual page 37

Copy/Print Media
2. Paper types:
For optimum printing quality, you should always use the printing media
specifically indicated by the manufacturer (see Supplies for recommended
media types). Use of non-recommended printing media may result in
incorrect paper feed and/or poor print quality.
Plain
Use good quality, bond office or inkjet paper.
Special copy/print media
For all types of special media, always read the instructions included
with the media pack.
Coated
This type of paper has a very smooth finish on the side to be used for
printing. You can insert it either in packs of up to 50 sheets in the input tray
or one at a time in the bypass tray.
Glossy
This is similar to that used in the photographic industry. You can insert it
either in packs of up to 25 in the input tray or one at a time in the bypass
tray.
Photographic
This type of paper has a sophisticated glossy coating, and gives a
professional finish to your print job. You can insert it either in packs of up
to 25 in the input tray or one at a time in the bypass tray.
Transparencies
Always use those specifically indicated for ink jet printers; they are
designed to absorb the ink correctly. You can insert them either in packs of
up to 50 in the input tray or one at a time in the bypass tray.
T-shirt/ textile transfers
Always use those specifically indicated for ink jet printers; they are
designed to absorb the ink correctly. You can insert them 5 at a time in the
input tray or one at a time in the bypass tray.
(continued)
31