Installation
Connecting your WorkCentre
(continued)
5. Lower the output tray to its operating
During WorkCentre operation, the side
guides on the output tray must remain
open and the paper length guide
should be positioned to accommodate
the paper size used (LETTER, LEGAL,
A4 are marked on the paper length
guide).
Be sure to power off the WorkCentre
and PC.
1. Plug the connector of the parallel
2. Connect the other end of the parallel
3. Insert the power cord in the
4. Plug the other end of the power cord
position.
cable that comes with your
WorkCentre into the socket on the
rear of the machine and close the
spring clips on it.
cable to the appropriate port on your
computer.
receptacle on the rear of the machine.
into a nearby wall outlet.
The outlet should only supply
power to your WorkCentre and not
be shared.
9