Table of Contents
Advertisement
Software Installation
5. Open Printers in Control Panel
a.
Click on Add>>, select Install Unlisted or Updated Printer in the
List of Printers and then click on Install... .
b.
Using Browse, select your CD drive (usually "d").
The list of language directories opens.
c.
Select the appropriate language and click OK.
The language directory opens to show "\printer" and "\scanner".
Select "printer" and click OK.
d.
"Xerox WorkCentre Series Xi" is now in the List of Printers in the
Add Unlisted or Updated Printer dialogue box. Click OK;
installation of the printer driver starts.
e.
Once installation is completed, "Xerox WorkCentre Series Xi" will be
in the Installed Printer dialogue box.
6. If you want to install the scanner driver, continue as follows:
a.
Open File Manager
b.
Select your CD drive (usually "d").
The list of language directories opens.
c.
Select the appropriate language and click OK.
The language directory opens to show "\printer" and "\scanner".
d.
Select "scanner" and click OK.
e.
Access "disk1"
f.
Click on "setup.exe"; installation of the scanner driver starts.
When the driver installation is completed, you will be asked to restart
Windows . If you wish to start operating immediately with your
WorkCentre, you should reply "yes" (Restart); if you intend to continue
installing software, you should reply "no" and restart only when you have
finished installing all the software.
22
(continued)
Advertisement
Table of Contents
