Table of Contents
Advertisement
Installation
Loading paper
8
(continued)
1. Raise the output tray, to simplify
2. Pull out the adjustable paper length
3. After fanning the paper thoroughly,
The surface to be printed should be
face downwards in the paper tray. This
is especially important for ink jet media
which is coated on one side.
4. Close the side guides against the
access to the automatic feeder.
guide on the input tray and make sure
that its adjustable side guides are
completely open.
Note the maximum fill indicators on
the side guides.
load it as a single stack on the input
tray, inserting it carefully until it stops
inside the machine.
paper margins and the paper length
guide against the trailing edge. Make
sure the paper height is below the
maximum fill line on the side
guides.
Advertisement
Table of Contents
