200-240 V Single Phase Non-Earthed - HP E1135C Operating And Service Manual

WIRING THE AC MAINS AND LOADS TO THE PDU
200–240 V Single Phase Non-Earthed
Figure 19. Wiring the Mains: 200
Tools for connecting mains, loads and jumper:


1/4-inch flat blade screwdriver


1/8-inch flat blade screwdriver


wire jumper between T2 and T3 (page 24)
Set the Voltage Selector Switch (S1) on the Control Board to 230V (page 9).
Wiring Loads: Wire line-to-line.
HP E1135C POWER DISTRIBUTION UNIT Rev. C
30
L1 L2 L3 N
1
0
G
T1 T2 T3 N 10A 10A
G L1 L2

240 V Single Phase Non-Earthed
MAINS1.WPG