Speeddial/Xfer; Speeddial/Xfer Key Requirements And Functionality; Configuring A Speeddial/Xfer Key - Mitel 6865i User Manual

LINE KEYS AND PROGRAMMABLE KEYS
Expansion Module Keys
Select fromKey 1 through Key 16(M680i)or Key 84(M685i).
6.
In the Typefield, selectBLF/Xfer.
7.
In theValue field, enter the monitored extension or the extension to transfer calls to (for example,
8.
3500).
In theLine field, select the line for which you want to use the key functionality.Valid values are:
9.
global
–
1 through24
–
ClickSave Settings.
10.

SPEEDDIAL/XFER

The Speeddial key allows a number to be dialed quickly by pressing one key configured for speed dialing.
The Transfer key allows a call to be transferred to other recipients blindly or consultatively. The Speed-
dial/Xfer key combines the Speed dial and Transfer key's functionality together allowing the user to
transfer calls or use speed dial with one key.
: It is recommended that you enable the Switch UI Focus to Ringing Line parameter when using the
NOTE
Speeddial/Xfer feature. For more information about this parameter, see

SPEEDDIAL/XFER KEY REQUIREMENTS AND FUNCTIONALITY

The Speed Dial/Xfer key has the following capabilities:
Speed Dial/Xfer and Speed Dial: When the phone is in the idle state, pressing the Speed Dial/Xfer key
•
causes the phone to go offhook and dial the predefined extension.
Speed Dial/Xfer and Blind Transfer: When the phone is connected to a call, pressing the Speed
•
Dial/Xfer key blind transfers the call to the predefined target.
If transferring a call fails, a message Transfer Faileddisplays, and you can reconnect the call (get the
call back) by pressing the line key again.
Speed Dial/Xfer and Call Forward: When the phone is in the ringing state, pressing the Speed
•
Dial/Xfer key forwards the call to the predefined extension.

CONFIGURING A SPEEDDIAL/XFER KEY

MITEL WEB UI
Click on Operation > Programmable Keys.
1.
or
Click on Operation > Expansion Module <N>.
SPEEDDIAL/XFER
"Switch UI Focus to Ringing Line".
80