Configuring A Dnd Key - Mitel 6865i User Manual

MANAGING CALLS
You can then configure a DND key for the phone using the Mitel Web UI at the path, Operation > Program-
mable Keys. You can enable and disable DND by toggling the key or by setting DND for a specific account
at the path, Basic Settings > Account Configuration. Once you enable DND, DND On displays on the LCD
for the applicable account.
: If there is only one account configured on the phone, then the mode setting is ignored and the
NOTE
phone behaves as if the mode was set to Phone.
The following describes the key behavior for each DND mode.
Account: The DND key toggles the account in focus on the IP phone UI, to ON or OFF if DND enabled
•
for that account.
Phone (default): The DND key toggles all accounts on the phone to ON or OFF.
•
Custom: The DND key displays custom screens on the IP phone UI. User can select whether to
•
enable/disable DND per account, enable DND on all accounts, or disable DND on all accounts.
:
NOTE
If you make changes to the configuration for DND via the IP phone UI, you must refresh the Mitel
a.
Web UI screen to see the changes.
If DND is enabled for an account, the Message Waiting Indicator (MWI) LED will turn on when
b.
the DND-enabled account is in focus.

CONFIGURING A DND KEY

To configure a DND key, see the section,
: If there is no DND key configured or if it is removed, DND is disabled on the IPphone.
NOTE
"Do Not Disturb (DND)
DND AND CALL FORWARD
Key".
129