Mitel 6865i User Manual page 150

MANAGING CALLS
IP PHONE UI
Use the
1.
In the above example, account 1 and account 2 are the accounts configured on the phone. Both ac-
counts have CFWD enabled as indicated by the CFWD All message.
: In Phone mode, when you change the call forward configuration for an account, the change
NOTE
applies to all accounts.
Press the Call Forward key. The Call Forward menu displays. Use the
2.
scroll through each state type.
In the above example, CFWD All is enabled as indicated by a check mark
but no call forward phone number configured as indicated by a !, and CFWD No Answer is disabled,
as indicated by an X.
Select a state using the
3.
You can enable/disable a specific account on the phone with any or all of the following states. How-
ever, the configuration you set will apply to all accounts on the phone.
All: Forwards all incoming calls for the respective account to the specified number.
–
Busy: Forwards incoming calls to a specified number if DND has been enabled for that account OR
–
if the account is currently engaged in another call.
No Answer: Forwards incoming calls to a specified number if the call has not been answered for the
–
specified number of rings.
: If CFWD All, CFWD Busy, and CFWD No Answer are all enabled (and/or if the account
NOTE
has DND enabled), the CFWD All settings take precedence over CFWD Busy and CFWD No
Answer.
navigation keys to scroll through each account.
navigation keys.
DND AND CALL FORWARD
navigation keys to
, CFWD Busy is enabled
140