Customizing Your Phone; Ring Tones And Tone Sets; Ring Tones - Mitel 6865i User Manual

CUSTOMIZING YOUR PHONE

CUSTOMIZING YOUR PHONE
The following paragraphs describe the options available from either the IP phone UI, the Mitel Web UI, or
both, and provide procedures applicable to the option.

RING TONES AND TONE SETS

xref "Installing Custom Ring TonesUsing the Mitel Web UI" in Phone_Op-
tions_via_the_Mitel_Web_UI.dita
You can configure ring tones and ring tone sets on the IP phone.

RING TONES

There are several distinct ring tones a user can select to set on the IP phones. In addition to the 15
pre-installed ringtones, custom ring tones can be manually installed through the Web UI and selected for
use (if enabled by your Administrator). You can enable/disable these ring tones on a global or per-line
basis.
: Individual contact ring tones are also supported on the 6865i. Individual contact ring tones can be
NOTE
used during incoming calls to help users identify the party calling. For more information on individual
contact ring tones, see
The following table identifies the valid settings and default values for each type of configuration method:
Ring Tones
CONFIGURATION METHOD
IP Phone UI
Mitel Web UI
Lines 1 to 24
Ring Tone Sets
"Local Directory Features".
VALID VALUES
Global
Tone 1 to 15
Silent
Custom Ring Tone 1 to 8
(if available)
Global:
Tone 1 to 15
Silent
Custom Ring Tone 1 to 8
(if available)
Per-Line Setting:
Global
Tone 1 to 15
Silent
Custom Ring Tone 1 to 8
(if available)
RING TONES AND TONE SETS
DEFAULT VALUE
Global Setting:
Tone 1
Global Setting:
Tone 1
Per-Line Setting:
Global
25