Table of Contents
Advertisement
2 | Installation / Connection
2. Use either the USB cable or the RS-232C cable to connect the PC to the monitor.
USB-B
RS-232C
*1
Cross type. The connector type on the monitor is D-Sub 9-pin. In the default settings, RS-232C
serial transfer is disabled. For details on how to change the settings, see "Functions of the
"Administrator Settings" Menu" in the User's Manual.
3. Connect the power cord into the AC adapter.
4. Connect the AC adapter to the power jack of the monitor, then connect the power plug
to a power outlet.
2.2 Turning On the Power
1. Press
to turn on the power.
The power switch indicator of the monitor lights up blue.
If the power indicator does not light up, refer to "No Picture" in the User's Manual.
2. Turn on the PC.
The screen image appears.
If the screen image does not appear after turning on the PC, refer to "No Picture" in the
User's Manual.
Attention
• For maximum power saving, it is recommended that the Power button be turned off. When not
using the monitor, you can disconnect the power plug so that the power is cut completely.
18
USB cable (included)
RS-232C cable*1 (commercially available)
USB-A
RS-232C
Advertisement
Table of Contents
