Table of Contents
Advertisement
Adding or Replacing the Computer or Devices
Disconnecting Wi-Fi Direct (Simple AP) Connection
Note:
When Wi-Fi Direct (Simple AP) connection disabled, all computers and smart devices connected to the printer in Wi-Fi
Direct (Simple AP) connection are disconnected. If you want to disconnect a specific device, disconnect from the device
instead of the printer.
1. Select
on the printer's home screen.
To select an item, use the
2. Select Wi-Fi Direct.
The Wi-Fi Direct information is displayed.
3. Select Start Setup.
4. Select
.
5. Select Disable Wi-Fi Direct.
6. Follow the on-screen instructions.
Related Information
"Changing the Wi-Fi Direct (Simple AP) Settings Such as the SSID" on page 136
&
Changing the Wi-Fi Direct (Simple AP) Settings Such as the SSID
When Wi-Fi Direct (simple AP) connection is enabled, you can change the settings from
Direct > Start Setup >
Change Network Name
Change the Wi-Fi Direct (simple AP) network name (SSID) used for connecting to the printer to your arbitrary
name. You can set the network name (SSID) in ASCII characters that is displayed on the software keyboard on the
control panel. You can enter up to 22 characters.
When changing the network name (SSID), all connected devices are disconnected. Use the new network name
(SSID) if you want to re-connect the device.
Change Password
Change the Wi-Fi Direct (simple AP) password for connecting to the printer to your arbitrary value. You can set
the password in ASCII characters that is displayed on the software keyboard on the control panel. You can enter 8
to 22 characters.
When changing the password, all connected devices are disconnected. Use the new password if you want to re-
connect the device.
u d l r
buttons, and then press the OK button.
, and then the following menu items are displayed.
>
Connecting a Smart Device and Printer Directly (Wi
136
...
> Wi-Fi
Advertisement
Table of Contents
