Table of Contents
Advertisement
Administrator Information
Items
Printing Timeout (sec)
Device Name
Location
LLTD Settings
Items
Enable LLTD
Device Name
LLMNR Settings
Items
Enable LLMNR
LPR Settings
Items
Allow LPR Port Printing
Printing Timeout (sec)
RAW(Port9100) Settings
Items
Allow RAW(Port9100) Printing
Printing Timeout (sec)
IPP Settings
Items
Enable IPP
Allow Non-secure Communication
>
Advanced Security Settings
Setting value and Description
Enter the communication timeout value for WSD printing
between 3 to 3,600 seconds.
Displays the WSD device name.
Displays the WSD location name.
Setting value and Description
Select this to enable LLTD. The printer is displayed in the
Windows network map.
Displays the LLTD device name.
Setting value and Description
Select this to enable LLMNR. You can use name resolution
without NetBIOS even if you cannot use DNS.
Setting value and Description
Select to allow printing from the LPR port.
Enter the timeout value for LPR printing between 0 to 3,600
seconds. If you do not want to timeout, enter 0.
Setting value and Description
Select to allow printing from the RAW port (Port 9100).
Enter the timeout value for RAW (Port 9100) printing be-
tween 0 to 3,600 seconds. If you do not want to timeout, en-
ter 0.
Setting value and Description
Select to enable IPP communication. When enabled, you will
be able to print over the Internet. It is also displayed when
searching for devices on the network. Only printers that sup-
port IPP are displayed.
Select Allowed to allow the printer to communicate without
any security measures (IPP).
195
>
Protocol Setting Items
Advertisement
Table of Contents
