Table of Contents
Advertisement
Network Settings
>
1. Select
on the home screen.
To select an item, use the
2. Select Wi-Fi (Recommended).
The network status is displayed.
3. Select Change Settings.
4. Select Others > Disable Wi-Fi.
5. Check the message, and then start setup.
6. When a completion message is displayed, close the screen.
The screen automatically closes after a specific length of time.
7. Press the
button.
Disconnecting Wi-Fi Direct (Simple AP) Connection
from the Control Panel
Note:
When Wi-Fi Direct (Simple AP) connection disabled, all computers and smart devices connected to the printer in Wi-Fi
Direct (Simple AP) connection are disconnected. If you want to disconnect a specific device, disconnect from the device
instead of the printer.
Disconnecting Wi-Fi Direct (Simple AP) Connection from the Control Panel
u d l r
buttons, and then press the OK button.
49
Advertisement
Table of Contents
