Problems When Making Settings - Epson WF-M4119 Series User Manual

Table of Contents

Advertisement

Administrator Information
5. Click OK.
Note:
You can confirm the connection status with the time server on Time Server Status.

Problems when Making Settings

Hints to Solving Problems
❏ Checking the error message
When trouble has occurred, first check whether there are any messages on the printer's control panel or driver
screen. If you have the notification email set when the events occur, you can promptly learn the status.
❏ Network connection report
Diagnose the network and the printer status, and then print the result.
You can find the diagnosed error from the printer side.
❏ Checking the communication status
Check the communication status of server computer or client computer by using the command such as ping
and ipconfig.
❏ Connection test
For checking the connection between the printer to the mail server, perform the connection test from the
printer. Also, check the connection from the client computer to the server to check the communication status.
❏ Initializing the settings
If the settings and communication status show no problem, the problems may be solved by disabling or
initializing the network settings of the printer, and then setting up again.
Cannot Access Web Config
The IP address is not assigned to the printer.
A valid IP address may not be assigned to the printer. Configure the IP address using the printer's
control panel. You can confirm the current setting information with a network status sheet or from
the printer's control panel.
Web browser does not support the Encryption Strength for SSL/TLS.
SSL/TLS has the Encryption Strength. You can open Web Config by using a web browser that
supports bulk encryptions as indicated below. Check you are using the a supported browser.
❏ 80bit: AES256/AES128/3DES
❏ 112bit: AES256/AES128/3DES
❏ 128bit: AES256/AES128
❏ 192bit: AES256
❏ 256bit: AES256
The TLS version is not supported
You need to communicate using TLS version 1.2 or later.
>
Settings to Use the Printer
183
>
Problems when Making Settings

Advertisement

Table of Contents
loading

Table of Contents