Table of Contents
Advertisement
Adding or Replacing the Computer or Devices
3. Press the OK button.
If the network connection is already set up, the connection details are displayed. Select Change to Wi-Fi
connection. or Change Settings to change the settings.
4. Select Wi-Fi Setup Wizard .
5. Follow the on-screen instructions to select the SSID, enter the password for the wireless router, and start setup.
If you want to check the network connection status for the printer after setup is complete, see the related
information link below for details.
Note:
❏ If you do not know the SSID, check if it is written on the label of the wireless router. If you are using the wireless
router with its default settings, use the SSID written on the label. If you cannot find any information, see the
documentation provided with the wireless router.
❏ The password is case-sensitive.
❏ If you do not know the password, check if the information is written on the label of the wireless router. On the label,
the password may be written "Network Key", "Wireless Password", and so on. If you are using the wireless router
with its default settings, use the password written on the label.
Related Information
"Entering Characters" on page 24
&
"Checking the Printer's Network Connection Status (Network Connection Report)" on page 128
&
Making Wi-Fi Settings by Push Button Setup (WPS)
You can automatically set up a Wi-Fi network by pressing a button on the wireless router. If the following
conditions are met, you can set up by using this method.
❏ The wireless router is compatible with WPS (Wi-Fi Protected Setup).
❏ The current Wi-Fi connection was established by pressing a button on the wireless router.
Note:
If you cannot find the button or you are setting up using the software, see the documentation provided with the wireless
router.
1. Select Wi-Fi on the home screen.
To select an item, use the
2. Select Wi-Fi (Recommended).
3. Press the OK button.
If the network connection is already set up, the connection details are displayed. Select Change to Wi-Fi
connection. or Change Settings to change the settings.
4. Select Push Button Setup (WPS).
5. Follow the on-screen instructions.
If you want to check the network connection status for the printer after setup is complete, see the related
information link below for details.
u d l r
buttons, and then press the OK button.
>
Re-Setting the Network Connection
126
>
...
Making Wi-
Advertisement
Table of Contents
