Epson WF-M4119 Series User Manual page 92

Solving Problems
The IP address is incorrectly assigned.
Solutions
If the IP address assigned to the printer is 169.254.XXX.XXX, and the subnet mask is 255.255.0.0, the IP
address may not be assigned correctly.
Settings > General Settings > Network Settings > Advanced > TCP/IP on the printer's control panel,
and then check the IP address and the subnet mask assigned to the printer.
Restart the wireless router or reset the network settings for the printer.
If the printer network settings are incorrect, reconfigure the printer network settings according to the
network environment.
"Re-Setting the Network Connection" on page 124
&
There is a problem with the network settings on the computer.
Solutions
Try accessing any website from your computer to make sure that your computer's network settings are
correct. If you cannot access any website, there is a problem on the computer.
Check the network connection of the computer. See the documentation provided with the computer for
details.
The printer has been connected by Ethernet using devices that support IEEE802.3az (Energy
Efficient Ethernet).
Solutions
When you connect the printer by Ethernet using devices that support IEEE802.3az (Energy Efficient
Ethernet), the following problems may occur depending on the hub or router that you are using.
❏ Connection becomes unstable, the printer is connected and disconnected again and again.
❏ Cannot connect to the printer.
❏ The communication speed becomes slow.
Follow the steps below to disable IEEE802.3az for the printer and then connect.
1. Remove the Ethernet cable connected to the computer and the printer.
2. When IEEE802.3az for the computer is enabled, disable it.
See the documentation provided with the computer for details.
3. Connect the computer and the printer with an Ethernet cable directly.
4. On the printer, print a network connection report.
"Checking the Printer's Network Connection Status (Network Connection Report)" on page 128
5. Check the printer's IP address on the network connection report.
6. On the computer, access Web Config.
7. Select Log in and enter the administrator password.
Launch a Web browser, and then enter the printer's IP address.
"Application for Configuring Printer Operations (Web Config)" on page 148
>
The Printer Does Not Work as Expected
>
Cannot Print
92