Table of Contents
Advertisement
(7) Select the song number of the disk to be copied to
with the up and down buttons.
1
3
DISK
CZ -
J
=
ZD
Song number of
— the disk to be
copied to
Note:
Jo stop copying halfway through, press the DISK button.
(8) Press the RECORD button.
The song to be copied is loaded.
The multifunction display appears as follows during
loading.
Flashes during
loading
A beep sounds when loading is finished.
(9) Insert the sequencer disk to be copied to.
(10) Press the RECORD button.
The loaded song will be copied to the disk.
The multifunction display appears as follows during
copying.
3
DISK
Flashes
writing
during
A beep sounds when copying of the loaded data is
finished.
(11) Insert the original sequencer disk.
(12) Press the RECORD button.
Data is loaded a second time.
A beep sounds when loading is completed.
(13) Repeat steps from 8 to 11. When copying is
completely finished, "OK" will be displayed on the
multifunction display. The FUNCTION button lamp
will turn off, the function mode will be canceled, and
the display will return to the song number selection
display.
Note:
The number of times the disks must be exchanged
depends on the length of the song, but even short
songs must repeat this process at least two times.
■ Song Deletion
This is to delete unnecessary songs from the floppy disk.
Note:
Turn the disk write protect off (close the window)
during deletion.
(1) Insert a sequencer disk.
(2) Press the DISK button.
The DISK button lamp lights.
(3) Select the song number to be deleted with the plus
(+) and minus (-) buttons.
1
3-
OiSK
_
_
JD L. U
Song number to
be deleted
Note:
To stop deletion halfway through, press the DISK button.
(4)
Press the FUNCTION button.
The function mode is entered and the FUNCTION
button lamp lights.
(5)
Select "DEL" with the plus (+) and minus (-) buttons.
1
3
DISK
,
11
cz
1
JJ L-
L.
Note:
To stop deletion halfway through, press the DISK
button.
60
Advertisement
Table of Contents
