Table of Contents
Advertisement
■ SR50
(1) Press the SYNTHESIZER switch in the KEYBOARD
CONDUCTOR section.
• Synthesizer Tuning (SR50)
The SR Series allows you to adjust the pitch of the
synthesizer relative to the other tones in increments of
1.5 cents up to a maximum of 45 cents on either side.
(2) Select a tone from the SYNTHESIZER control block.
Pressing a tone switch automatically cancels the
current one.
(3) (OPTIONAL) Add effects.
^SYNTHE.
(1) Press the SYNTHE switch in the TUNE section to
change the multifunction display to the one shown
below.
1
1
1
n
TUNE
ij
(2) Use the arrow switches in the RHYTHM section to
adjust the relative pitch.
SYNTHESIZER
^RTA.I
-
men
^VARI.I
(=i0
c=3 a
a a
1
1 1
1
CD
^RTAJ
^
VARIJ
CD
U
an
CD CD CD
1=10
[=0
VOLUME
PORTA — These smooth the transitions (continuous
Glide) between notes for legato playing. Pressing PORTA
I, PORTA II, or both simultaneously (PORTA III) provides
three successively faster transitions.
TOUCH — This allows you to control tone, volume and
effect by varying the key force, speed, and pressure you
apply to the keyboard.
T. VIB. (Touch Vibrato) — This adds vibrato to the
keyboard output. The amount and speed depend on the
pressure applied to the key.
VARI. I and VARI. II — These add variations of sound
to the synthesizer output. They may also be used in
combination.
(4) Adjust the volume as necessary.
Note:
The display gives the relative pitch in units of 1.5 cents
over the range 0—30 on either side.
(3) Press the SYNTHE switch in the TUNE section a
second time to return the multifunction display to
the original contents.
1
/
CHORD
1
J=
/
■_'/ /"/
/
L-
U
23
Advertisement
Table of Contents
