Table of Contents
Advertisement
■ UPPER ORCHESTRA
(1) Changing registrations is as easy as pressing the
ORCHESTRA I (ORCHESTRA on the SR50) switch in
the KEYBOARD CONDUCTOR section.
SR70
Note:
At this point, you may wish to double-check by
sounding a note on the corresponding keyboard. If not,
this entire step becomes optional.
(2) Select a tone from the ORCHESTRA I (ORCHESTRA
on the SR50) section of the UPPER MANUAL con¬
trol block. Only the last one pressed takes effect.
SR70
(3) (OPTIONAL) If you wish to mix in an ORCHESTRA
II tone (SR70), simultaneously press the ORCHES¬
TRA I and ORCHESTRA II switches in the KEY¬
BOARD CONDUCTOR section.
(4) (OPTIONAL) Add effects from the ORCHESTRA
effect control block.
SUSTAIN (ORCHESTRA I) — This adds extra reso¬
nance (prolongs sound) to the ORCHESTRA I output.
Pressing SUS I, SUS II, or both simultaneously (SUS III)
provides three successively longer resonances.
VARI — This adds variations to the output of both
ORCHESTRA sections.
TOUCH — This allows you to control tone, volume and
effect by varying the key force, speed, and pressure. You
cannot, however, provide separate effects for the two
S0ctions
SUSTAIN (ORCHESTRA II) — This adds extra reso¬
nance (prolongs sound) to the ORCHESTRA II output.
Pressing SUS I, SUS II, or both simultaneously (SUS III)
provides three successively longer resonances.
(5) Adjust the volume as necessary. There are separate
volume controls for ORCHESTRA I and ORCHES¬
TRA II.
14
Advertisement
Table of Contents
