Kawai SR50 Owner's Manual page 60

(3) Select the index number to be loaded with the plus (
+) and minus (-) buttons.
The index number is displayed on the multifunction
display.
If the index number selected has already been saved,
the point lights.
1
.•Jl
DISK__
,
o c: r:
(4) Press the PLAY button.
The multifunction display changes as follows.
DISK
o
c r:
/ ' .L- .LJ.
Note:
Index numbers which do not contain any data cannot
be loaded.
(5) Select the registration number to be loaded with the
plus (+) and minus (-) buttons.
Pressing these buttons changes the display as fol-
(SR50 is up to RG. 5. and RPG)
RG 1 (Data in Bank A of registration memory button 1)
RG. l.(Data in Bank B of registration memory button 1)
X
RG 2 (Data in Bank A of registration memory button 2)
e
i
RG 7 (Data in Bank A of registration memory button 7)
X
RG. 7.(Data in Bank B of registration memory button 7)
X
RG P (Panel registration)
1
3
1
DISK
,
iJ
r:
1
"
O. 1 .
L
(6) Selectthe location where the loaded registration data
is to be inserted. If the location is not specified, it is
called up on the panel.
(7) Press the WRITE button.
The WRITE button lamp lights and the selected reg¬
istration data is loaded. The multifunction display is
as follows during loading.
3
1
1
u
DISK
1
J = '
■
/h 4^
■
flash.
When loading is completed, a beep is sounded, and
"OK" is displayed on the multifunction display. The
lamps in the WRITE and DISK buttons turn off, and
the multifunction display returns to its original dis¬
play.
56