Table of Contents
Advertisement
Notes:
• Set the rhythm so that it is on standby to start. By
playing the lower pedals, the rhythm will start after the
introduction pattern.
• When the number of bars reaches 100, its indication
number turns to "0", and the 101st bar will be indi¬
cated as "1".
(9)
Press the STOP button when the performance is
finished.
Recording is stopped, and the lamps in the RECORD
and PLAY buttons turn off. The lamp of the track that
was being recorded on changes from flashing to
continuously lit, and the multifunction display returns
to the song number selection display.
Note:
If the recording capacity is exceeded, a long beep is
sounded, "ERR" is displayed on the multifunction dis¬
play, and recording is stopped. The song cannot be re¬
corded in this case.
(10) Press the DISK button.
The DISK button lamp turns off and the multifunc¬
tion display returns to its original display.
SR70
SR50
R nr
1 LOWER
1 SYS
rr n
P
—
1'^"
1
I LOWER
n
49
Advertisement
Table of Contents
