Kawai SR50 Owner's Manual page 58

(3) Select the index number to be saved with the plus
{+) and minus (-) buttons.
The index number is displayed on the multifunction
display.
If the index number selected has already been saved,
the point lights.
(4) Press the RECORD button.
The RECORD button lamp lights and the multifunc¬
tion display changes as follows.
1
3
c
DISK_
f
f—
n c: l3
Note:
If the write protect is on, a long beep is sounded, "ERR"
is displayed, and the disk mode is canceled.
(5) Press the WRITE button.
The WRITE button lamp lights and data is saved.
The multifunction display is as follows during saving.
3
q
DISK
Ui 4^
Three asterisks
flash.
When saving is completed, a bepp is sounded, and
"OK" is displayed on the multifunction display. The
DISK button lamp turns off and the multifunction
display returns to its original display.
■ Loading From A Floppy Disk 1
This procedure loads 14 (10 for SR50) registration items
collectively from the disk.
(1) Insert a registration disk.
(2) Press the DISK button.
The DISK button lamp lights and the multifunction
display indicates the following. Index number 1 is
selected at this time.
o
c rz
I' C L3
Index number
54