Kawai SR50 Owner's Manual page 37

Digital electronic organs
Hide thumbs Also See for SR50:
Table of Contents

Advertisement

■ Listening to a Particular Instrument
(1) To limit the rhythm pattern to a particular instru¬
ment, hold down the key labelled EXTRACT (the first
C# on the lower keyboard) and press the key corre¬
sponding to that instrument.
(2) To add other instruments, keep the EXTRACT key
switch pressed and press the appropriate keys
corresponding to the instruments you would like to
add.
(3) Release the EXTRACT key to return to the complete
pattern.
■ Correcting Timing Errors
It is often difficult to ensure precise timing when the
pattern contains a number of instruments. The SR
Series therefore provides facilities for automatically
adjusting note positions so that they line up at regular
intervals within the bar.
<During lnput>
(1) Specify the timing interval by holding down the
appropriate key combination —
(the first F# on
the lower keyboard) or
(the first G#) plus the
optional triplet (the first A#) — as you add notes to
the pattern. The organ will then automatically shift
notes that are not at the exact positions. (See chart
on the next page for examples.)
Note:
This function does not affect the position of any
existing notes for the same instrument.
• Compound Example
This pattern requires the use of three different timing
intervals:
for the part labelled A,
J\
for B, and
and triplets for C.
<After lnput>
(1) Stop the rhythm.
(2) Specify the timing interval by holding down the
appropriate key combination — j) (F#) or
(G#)
plus the optional triplets (A#).
for an instrument to automatically align the entire
pattern for that instrument.
■ Delays
A built-in function allows you to introduce a slight delay
between an instrument and the others.
(1) Use the EXTRACT key to select the desired instru¬
ments.
(2) Hold down the EXTRACT key and press the MOVE
key to introduce slight delays for particular seg¬
ments. The delay time depends on the tempo.
(3) To shift the instrument back to the original position
for a particular segment, hold down the EXTRACT
key and press both the MOVE and RESET keys.
33

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sr70

Table of Contents