■ Starting from Scratch — ALL CLEAR
(1) For the first two steps of the general procedure,
choose a prerecorded pattern with the same time
signature and length in bars.
Note:
These parameters automatically appear on the multi¬
function display whenever you select a rhythm
pattern.
(2) Simultaneously press the two keys labelled ALL
CLEAR (the first G and A on the lower keyboard).
(3) Without releasing the EXTRACT key, press the key
to receive this new assignment.
Assignable keys
Note:
If you press more than one, the organ assigns the
inctnimpnt to them all.
(3) Press the RHYTHM switch to start the metronome.
(4) Record and edit the new pattern with the same
techniques as the basic procedure.
■ Changing Hand Percussion Assignments
The RHYTHM section's programming capabilities can
extend as far as allowing you to change the hand
percussion keyboard assignments.
<LOWER keyboard>
(1) Repeat step 1 of the basic procedure.
(2) Hold down the EXTRACT (C#) key and press the key
for the instrument that you wish to reassign.
Note:
If you press more than one, the organ chooses the last
key pressed.
(4) To cancel the assignment, hold down the ERASE (F)
key and press the key to be cleared.
(5) Quit the programming mode with step 14 of the
basic procedure.
<Touch bars>
(1) Repeat step 1 of the basic procedure.
(2) Hold down the key for the desired instrument and
press the touch bar to which you wish to assign it.
II III
VPIIfP
■ ■ III ■■
A
1 1 1 1 1
i
z '/I ihi
()
(3) To return a touch bar to its standard setting (snare
drum roll or cymbal crash), hold down the RESET
key and press the touch bar.
basic procedure.
35