Kawai SR50 Owner's Manual page 59

(3) Select the index number to be loaded with the plus
(+) and minus (-) buttons.
The index number is displayed on the multifunction
display.
if the index number selected has already been saved<
the point lights.
1
~1
.3
DISK
,
o c: r:
*'■ /
yLl.LJ.
1 1
1
1 I I
The points light if the
index number's data
has already been saved.
(4) Press the PLAY button.
The multifunction display changes as follows.
1
'1
1
L.
:d
DISK ___
,
u c: n
/ '.L-.LJ.
Note:
Index numbers which do not contain any data cannot
be loaded.
(5) Press the WRITE button.
Loading begins and the 14 registration items except
for a panel registration (10 items for the SR50) are
loaded.
The multifunction display is as follows during load¬
ing.
3
1
L.
DISK
J-
/fs
4
^
/fv
Three asterisks
flash.
When loading is completed, a beep is sounded, and
"OK" is displayed on the multifunction display. The
lamps in the WRITE and DISK buttons turn off, and
the multifunction display returns to its original dis¬
play.
■ Loading From A Floppy Disk 2
This procedure loads registration data one by one from
the floppy disk.
(1) Insert a registration disk.
(2) Press the DISK button.
The DISK button lamp lights and the multifunction
display indicates the following. Index number 1 is
selected at this time.
DISK
J =
55