Table of Contents
Advertisement
• Procedure
(1) Changing registrations is as easy as pressing the
appropriate PRESET INSTRUMENT switch in the
KEYBOARD CONDUCTOR section. There are two:
UPPER PRE. INST for the SOLO keyboard (SR70
only) and PRESET INSTRUMENT for the UPPER.
SR70
(2) Select a tone (instrument) from the ones offered in
the UPPER/SOLO MANUAL section. Pressing a
switch automatically cancels the preceding instru¬
ment.
SR70
n
1
PRESET l\STRl^i£\!
|
gj'
Kwh
m'
1^1
H
|g'
Hlis
(3) (OPTIONAL) Add effects.
r
m
L
SUSTAIN — This adds extra resonance (prolongs
sound) to the PRESET INSTRUMENT output. Pressing
SUS I, SUS II, or both simultaneously (SUS III) provides
three successively longer resonances.
VARI — This adds a variation of sound to the PRESET
INSTRUMENT output.
TOUCH — This allows you to control tone, volume and
effect by varying the key force, speed, and pressure.
(4) Adjust the volume as necessary.
■ PRESET INSTRUMENTS
Certain instruments offer additional effects.
HAWAIIAN GUITAR — This automatically converts the
right foot switch to the Glide function. Pressing this
switch changes the Hawaiian guitar tone to a flat. In
this case fill-in or ending performance or timpani
ON/OFF are not available.
MARIMBA/BANJO — The organ continuously repeats
notes. If the Touch function is on, the force applied on
the keyboard determines the speed of this repetition.
PRESET INSTRUMENT
^
sus.i
^ VARI.
□
0
C=3 Q
1
i
1
1
(=1 0
^
SUS.D
^ TOUCH
1
-
1
u
□
D
c=iO
c=3 D
1
II
1
VOLUME
19
Advertisement
Table of Contents
