Table of Contents
Advertisement
• Inserting and Removing the Floppy Disk
With the label facing up, insert the floppy disk into the
slot from the shutter end until it clicks into place.
Slowly press the Eject button to remove the disk.
• DO NOT remove the floppy disk while it is being
used.
The floppy disk is being used when the lamp of the
floppy disk slot is on. Do not, under any circum¬
stances, remove the floppy disk when the lamp is on.
If it is removed, not only may the data be lost, but
there is a chance that the disk itself may be damaged
and unable to be used again.
■ Formatting a New Floppy Disk
Formatting must be carried out when using a new disk or
a disk other than one for the SR, or when changing from
a sequencer disk to a rhythm disk. When formatting, one
of the following types of disks must be designated for use
in the SR.
• Floppy disk for the disk sequencer
• Floppy disk for registration save/load
• Floppy disk for rhythm save/load
Notes:
• The disk's write protect should be off (window closed)
during formatting.
• The disks supplied with the SR do not need to be for¬
matted.
• If a disk with data stored on it is formatted, the con¬
tents will be deleted.
• When formatting a disk that has already been format¬
ted once, carry out reformatting while in the function
mode. (Refer to page 000 for the function mode.)
• Other functions cannot be used after formatting.
Example: Recording a song to an rhythm formatted
disk.
(1)
Insert a new floppy disk.
(
2
)
Press the DISK button.
The DISK button lamp and FUNCTION button lamp
light.
SR70
SR50
DISK on the multifunction display lights and the dis¬
play indicates the following.
1
I
I
(3)
Press the PLAY button.
The multifunction display changes as follows.
DISK
_
_
_
,
L. 1.
I I
_J L_
ill
(4)
Selectthetype of format usingthe plus (+) and minus
(-) buttons.
SEQ: Formats the disk as a sequencer disk.
REG: Formats the disk as a registration disk.
RHY: Formats the disk as a rhythm disk.
[7 _
17 .
Function
LflJ CD 1
-
1
Note:
Press the DISK button to stop formatting.
42
Advertisement
Table of Contents
