Step Setting Method - Brother BM-2000 Instruction Manual

3 USING THE OPERATION PANEL AND SWITCHES

3.2.4 Step setting method

From 1 to 8 steps can be added to a single program. Different parameters can be set separately for each step. Steps can also be
changed while gluing is in progress by pressing the knee switch. Adding/deleting and selecting steps can be carried out in the
"Select/edit step" screen.
Select the program No. (P01 – 30) that you would like to change the setting for.
1.
Carry out any one of the following operation to select the step No. (01 - 08) that you would like to change the setting for.
2.
Press the key or the
A)
touch the step number to display the "Select/edit step" screen, select the step number, and then touch
B)
12
key. The step No. changes by one each time you press it once.
BM-2000
.